What usually happens
A plant is sized from a capacity and a price, then struggles on the real feed water.
What we do
Designed from your water analysis
We test your water first, and design every stage for what's actually in it.
Water treatment plants, engineered to a written spec.
Industrial RO, seawater desalination, effluent and sewage treatment, and softeners. Sized from your water analysis, with output, quality and running cost stated in the proposal and proven at commissioning.
Output proven at commissioningRunning cost stated up frontServiced by the team that built it
A typical RO treatment train
Every stage is sized from your water analysis.
Raw water
Borewell, municipal or surface water, tested before anything is designed.
Pre-treatment
Filters and dosing remove solids, chlorine and hardness.
Reverse osmosis
Membranes separate pure water from dissolved salts.
Product water
Polished and stored, at the quality written in the proposal.
Our approach
Most plants are sold on capacity. Ours are sold on a specification.
A capacity and a price don't tell you whether a plant will work on your water, or what it will cost to keep running. So we put the numbers that matter in writing.
What usually happens
Quotes compare purchase price. Power, chemicals and membranes show up later, on your bills.
What we do
Running cost in the proposal
Each proposal states power, chemical and consumable costs per cubic metre, so you compare plants on what they really cost.
What usually happens
After handover, the people who designed the plant move on, and performance drifts.
What we do
Kept on spec after handover
The team that built your plant services it, against the same specification.
Plants
Start with your water
What you need depends on where your water comes from and where it's going. Choose your source.
Borewell and municipal water
Hard or high-TDS water, for boilers, process lines, cooling and drinking.
Seawater and brackish water
Saline water turned into fresh water, where fresh water is scarce.
Industrial effluent
Wastewater from your process, treated to your consent limits or for reuse.
Sewage
Sewage from buildings, campuses and townships, treated for discharge or reuse.
How we work
Four steps, each with something in writing
You always know what we've found, what we're committing to and what we've delivered.
Water analysis
We test your water and record your flow, usage and quality targets.
Water analysis reportSpecification
We choose the technology, size every stage, and state the output, quality and running cost.
Proposal with specificationBuild and commission
We supply and install the plant, then run it to prove its output against the specification.
Commissioning reportKeep it on spec
Scheduled service, cleaning and performance checks keep the plant at its specified output.
Service log
Running cost
Price the litre, not the plant.
Over its life, a plant's power, chemicals, membranes and labour usually cost more than the plant itself. Two quotes for the same capacity can have very different running costs.
So every Megaflux proposal states what the plant will cost to run, in figures you can compare, and hold us to.
What every proposal states
- PowerkWh per m³
From pump and blower sizing, at your feed water.
- Chemicals₹ per m³
Antiscalant, dosing and cleaning chemicals at their expected use.
- Membranes and mediaReplacement interval
How long membranes, resin and filter media should last on your water.
- Recovery and reject% and m³ per day
How much water becomes product, and how much leaves as reject or sludge.
- OperationHours per day
The operator time the plant needs.
Industries
Built for the water each industry has
Every industry asks something different of its water. These are some of the sites we design for.
Pharmaceuticals
Purified process water, and treatment of effluent.
Textiles and dyeing
Effluent treatment for colour and high-TDS wastewater, and soft water for processing.
Food and beverages
RO water for products and washing, and wastewater treatment.
Chemicals
Process water, and treatment of complex effluent.
Power and boilers
Softened and RO water that stops scale.
Hotels and hospitals
Sewage treatment, softeners and drinking water.
Real estate and townships
Sewage treatment, with treated water reused for flushing and gardens.
Coastal sites
Seawater desalination where fresh water is scarce.
Service and AMC
Kept on spec, by the team that built it
Without care a plant drifts: membranes foul, resin wears out, dosing slips. We service your plant against the specification it was built to, so its output stays where the proposal said it would.
Scheduled visits
Inspection, cleaning and calibration on a fixed calendar.
Performance checks
Output, quality and running cost measured against the specification.
Breakdown support
Priority response for plants under an annual contract.
Spares and consumables
Membranes, resin, cartridges, pumps and dosing chemicals.
Contact
Send us your water report
We'll come back with what will work on your water, and what it will cost to build and to run.
Useful to include
- Your water source, and a water analysis report if you have one
- How much treated water you need, per hour or per day
- What the water is for, and the quality you need
- Your location, and photos of the site if you can
- Call+91 99092 14289
- Email[email protected]
- Visit10, Yogashram Society, Manekbaug, Ahmedabad, Gujarat 380007